Whether it is Pharma, Biotech, Beverage, or High Purity Chemical, our sanitary filter housing are excellent quality at an affordable cost. Single Rounds or Multi-Rounds, we guarantee the quality of our product.
| Applications |
| Stacked
Disc |
| Membrane
Systems |
| Bag Filters |
| Backwash Systems |
| Compressed
Air |
| Oil Purification |
| Disinfection
Agents |
| Labwater |
| Gravity
Filters |
| Dessicant
Breathers |
| Strainers |
| Gauges |
| Pumps |
| Air Filters |
| Carbon
Cartridges |
| Sanitary
Parts |
| POU
RO Systems |
| Plastic
Housings |
Single-Round
Filter Housings - Critical Process single cartridge
sanitary housings are available in T-style or Inline configurations and offered
in lengths from 5 through 40 inches. Sanitary clamp closures are a proven
design suited for pharma, biotech, high purity chemical, and beverage applications.
Standard 316L Stainless Steel with
a 25 RA internal finish, housings are standard with 2-226 style cartridge
adaptors allowing a positive locking tab seal. This gives flexibility in one
housing to use different cartridge
lengths and maximize filter performance and cost.
CSH housings have no internal threaded parts that come in contact with the process fluid and are standard with food grade silicone gaskets. 1” sanitary gauge port tops with 1/2” sanitary vent and drain ferrules are standard features. Each vent and drain port is standard with solid cap, silicone gasket and clamp. Gauge and vent pachages are available.
Click Here for more information
Multi-Round
Filter Housings - Critical Process multi cartridge
sanitary housings, available in 3,6,8,12 and 21 round models with swing bolt
closures are a proven design suited for high purity beverage, chemical and
pharmaceutical applications.
Standard 316L Stainless Steel with a 25 RA internal finish, housings are standard with 2-226 style cartridge adaptors with removable tube sheet, giving you a positive locking tab seal. This allows flexibility in one housing to use different cartridge lengths and maximize filter performance and cost.
CSH housings have no internal threaded parts that come in contact with the process fluid each housing is standard with a spring loaded hold down plate and are standard with food grade silicone gaskets. 1” sanitary gauge port tops with 1/2” sanitary vent and drain ferrules are standard features. Each vent and drain port is standard with solid cap, silicone gasket and clamp
Click Here for more information
Contact Information
Filter Technologies, Inc.
168 Manalapan Road, Spotswood, NJ 08884
Phone: 732-251-9500 Fax: 732-251-9503
E-mail Inquires: Contact Us