Filter Technologies provides quality depth filters suitable for many processes. Our standard melt-blown is a true winner for RO prefiltration, general water applications, and for the filtration of many types of chemicals.
High efficiency depth filters provide exceptional value. They are available in all end cap configurations.
Please note that certain process conditions affect cartridge performance. Flow rate, velocity, viscosity, temperature, and surface area are some of the important considerations when developing a filtration process. Pressure gauges are essential. Consult Filter Technologies for your process development requirements.
| Applications |
| Stacked
Disc |
| Membrane
Systems |
| Bag Filters |
| Backwash Systems |
| Compressed
Air |
| Oil Purification |
| Disinfection
Agents |
| Labwater |
| Gravity
Filters |
| Dessicant
Breathers |
| Strainers |
| Gauges |
| Pumps |
| Air Filters |
| Carbon
Cartridges |
| Sanitary
Parts |
| POU
RO Systems |
| Plastic
Housings |
ClearFlow
- manufactured by a continuous spun bonding technology that
assures a consistent product. 100% all polypropylene construction gives wide
chemical compatibility and low extractables.
These cartridges offer exceptional value in both particle removal efficiency and dirt holding capacity. When sized for flow rates of 2 to 3 gpm per 10-inch cartridge length, ClearFlow's filter life and particle capture is greatly enhanced. Click Here for (2) different photos of slow flow applications and (1) photo of where it is evident of poor retention due to high flow rate.
XSPD
- Spun-bonded bi-component media cosntructed of Polypropylene
and Polyetheylene give this cartridge a 95 % filter rating. Cartridges available
down to 0.3-micron.
These high efficient cartridges are designed for high throughput and excellent particle retention. These cartridge are suitable replacements against other "absolute rated" cartridges that cost up to three times as much.
NSPD
- Spun-bonded bi-component media cosntructed of Polypropylene
and Polyetheylene give this cartridge a 99 % filter rating. Cartridges available
down to 0.3-micron.
This cartridge is used when that "little extra" is needed to assure the filtration process continually needs to meet the most demanding standards. The NSPD is typically used after performance testing with the XSPD. Excellent performance agains other major brands.
Contact Information
Filter Technologies, Inc.
168 Manalapan Road, Spotswood, NJ 08884
Phone: 732-251-9500 Fax: 732-251-9503
E-mail Inquires: contact us
Glass
Depth Cartridge - The Clear-Flow resin-bonded cartridge
has excellent dirt holding capacity and long service life. The ability to
control the glass fiber also gives us excellent efficiencies and flow rates.
Offered in a broad range of microns .5 to 125 micron and lengths ranging
from 9.75” to 40”.
Each element is core supported and grooved for high viscosity applications and increased dirt holding. This glass microfiber is exellent at high temperature filtration applications (except water).
String
Wound Cartridge - Our state of the art computerized
production machinery takes the variables out of custom winding and enables
us to produce filter cartridges that are accurately wound from a single strand
of specially selected fibrous roving material, wound around a perforated core
in a nearly perfect geometric pattern.
MicroSentry wound cartridges can be produced from a wide range of materials.
With a range of 0.5-150 microns filtration, depending on your requirement
for removal of solids from liquids, compressed air or gases.